diff --git a/main/main.ino b/main/main.ino
index 4142707..ef378a5 100644
--- a/main/main.ino
+++ b/main/main.ino
@@ -1,216 +1,216 @@
-#include <RCSwitch.h>
-#include <Wire.h>
-#include <Rtc_Pcf8563.h>
-
-RCSwitch mySwitch = RCSwitch();
-Rtc_Pcf8563 rtc;
-
-// defining used pins
-int wind = 8;
-int rain = 12;
-int receiver = 9;
-
-int relay1 = 7;
-int relay2 = 6;
-int relay3 = 5;
-int relay4 = 4;
-
-// codes from remote controller
-const int recRelay4 = 3696136;
-const int recRelay3 = 16736114;
-const int recRelay2 = 16736120;
-const int recRelay1 = 16736113;
-
-int delayTime = 500;
-// status of roleta
-bool isOpen = false;
-
-
-void setup()
-{
-  Serial.begin(9600);
-
-  pinMode(relay1, OUTPUT);
-  pinMode(relay2, OUTPUT);
-  pinMode(relay3, OUTPUT);
-  pinMode(relay4, OUTPUT);
-  pinMode(wind, INPUT);
-  pinMode(rain, INPUT);
-
-  mySwitch.enableReceive(0); // Receiver on interrupt 0 => that is pin #2
-
-  //clear out the registers
-  ///rtc.initClock();
-  //set a time to start with.
-  //day, weekday, month, century(1=1900, 0=2000), year(0-99)
-  ///rtc.setDate(18, 6, 6, 0, 21);
-  //hr, min, sec
-  ///rtc.setTime(18, 44, 0);
-}
-
-void updateRTC()
-{
-  /*
-     function to update RTC time using user input
-  */
-
-  // ask user to enter new date and time
-  const char txt[6][15] = { "year [4-digit]", "month [1~12]", "day [1~31]",
-                            "hours [0~23]", "minutes [0~59]", "seconds [0~59]"};
-  String str = "";
-  long newDate[6];
-
-  while (Serial.available()) {
-    Serial.read();  // clear serial buffer
-  }
-
-  for (int i = 0; i < 6; i++) {
-
-    Serial.print("Enter ");
-    Serial.print(txt[i]);
-    Serial.print(": ");
-
-    while (!Serial.available()) {
-      ; // wait for user input
-    }
-
-    str = Serial.readString();  // read user input
-    newDate[i] = str.toInt();   // convert user input to number and save to array
-
-    Serial.println(newDate[i]); // show user input
-  }
-
-  // update RTC
-  //rtc.adjust(DateTime(2021, newDate[1], newDate[2], newDate[3], newDate[4], newDate[5]));
-  rtc.setDate(newDate[2], 6, newDate[1], 0, 2020);
-  Serial.println("RTC Updated!");
-}
-
-void relayOn(int pin, bool controller = false)
-{
-  Serial.print("realy ");
-  Serial.print(pin);
-  Serial.print("\n");
-
-  if(controller == false)
-  {
-    Serial.println("jsemtu");
-    if(pin == relay4)
-    {
-      isOpen = true;
-    }
-    if(pin == relay1)
-    {
-      isOpen = false;
-    } 
-  }
-
-  digitalWrite(pin, HIGH);
-  delay(delayTime);
-  if(pin == relay3) {
-  //  delay(1500);
-  }
-  digitalWrite(pin, LOW);
-  
-  delay(delayTime);
-}
-
-void loop()
-{
-  //formatted strings are at the current time/date.
-  Serial.print(rtc.formatTime());
-  Serial.print("\r\n");
-  Serial.print(rtc.formatDate());
-  Serial.print("\r\n");
-  delay(1000);
-
-  // assign day and month into variable
-  char h1 = rtc.formatTime(RTCC_TIME_HM)[0];
-  char h2 = rtc.formatTime(RTCC_TIME_HM)[1];
-  int onlyHour = ( 10 * (h1 - '0') ) + h2 - '0';
-
-  char m1 = rtc.formatTime(RTCC_TIME_HM)[3];
-  char m2 = rtc.formatTime(RTCC_TIME_HM)[4];
-  int onlyMinutes = ( 10 * (m1 - '0') ) + m2 - '0';
-
-  char M1 = rtc.formatDate()[0];
-  char M2 = rtc.formatDate()[1];
-  int onlyMonth = ( 10 * (M1 - '0') ) + M2 - '0';
-  
-  Serial.println(onlyHour);
-  Serial.println(onlyMinutes);
-  Serial.println(onlyMonth);
-  Serial.println(isOpen);
-
-  // setting up date and time from serial monitor
-  if (Serial.available())
-  {
-    char input = Serial.read();
-    if (input == 'u') updateRTC();  // update RTC time
-  }
-
-  // time actions
-  if(onlyMonth >= 5 && onlyMonth <= 8)
-  {
-     if(onlyHour >= 7 && onlyHour <= 14)
-     {
-        if(isOpen == false)
-        {
-          Serial.println("cas otevira");
-          relayOn(relay4);
-        }
-     }
-     else
-     {
-        if(isOpen == true)
-        {
-          Serial.println("cas zavira");
-          relayOn(relay1);
-        }
-     }
-  }
-  
-  // rain actions
-  if(digitalRead(rain) != HIGH)
-  {
-    Serial.println("voda zavira");
-    relayOn(relay1, true);
-  }
-  
-  // wind actions
-  if (digitalRead(wind) == HIGH)
-  {
-    Serial.println("vitr zavira");
-    //relayOn(relay1, true);
-  }
-  else
-  {
-    //digitalWrite(relay1, LOW); -> probably useless
-  }
-
-  // remote controller actions
-  if (mySwitch.available())
-  {
-    int received = mySwitch.getReceivedValue();
-    Serial.println("Received " + received);
-
-    if (received == recRelay1)
-    {
-      relayOn(relay1, true);
-    }
-    if (received == recRelay2)
-    {
-      relayOn(relay2, true);
-    }
-    if (received == recRelay3)
-    {
-      relayOn(relay3, true);
-    }
-    if (received == recRelay4)
-    {
-      relayOn(relay4, true);
-    }
-
-    mySwitch.resetAvailable();
-  }
-}
+#include <RCSwitch.h>
+#include <Wire.h>
+#include <Rtc_Pcf8563.h>
+
+RCSwitch mySwitch = RCSwitch();
+Rtc_Pcf8563 rtc;
+
+// defining used pins
+int wind = 8;
+int rain = 12;
+int receiver = 9;
+
+int relay1 = 4;
+int relay2 = 6;
+int relay3 = 5;
+int relay4 = 7;
+
+// codes from remote controller
+const int recRelay4 = 3696136;
+const int recRelay3 = 16736114;
+const int recRelay2 = 16736120;
+const int recRelay1 = 16736113;
+
+int delayTime = 500;
+// status of roleta
+bool isOpen = false;
+
+
+void setup()
+{
+  Serial.begin(9600);
+
+  pinMode(relay1, OUTPUT);
+  pinMode(relay2, OUTPUT);
+  pinMode(relay3, OUTPUT);
+  pinMode(relay4, OUTPUT);
+  pinMode(wind, INPUT);
+  pinMode(rain, INPUT);
+
+  mySwitch.enableReceive(0); // Receiver on interrupt 0 => that is pin #2
+
+  //clear out the registers
+  ///rtc.initClock();
+  //set a time to start with.
+  //day, weekday, month, century(1=1900, 0=2000), year(0-99)
+  ///rtc.setDate(18, 6, 6, 0, 21);
+  //hr, min, sec
+  ///rtc.setTime(18, 44, 0);
+}
+
+void updateRTC()
+{
+  /*
+     function to update RTC time using user input
+  */
+
+  // ask user to enter new date and time
+  const char txt[6][15] = { "year [4-digit]", "month [1~12]", "day [1~31]",
+                            "hours [0~23]", "minutes [0~59]", "seconds [0~59]"};
+  String str = "";
+  long newDate[6];
+
+  while (Serial.available()) {
+    Serial.read();  // clear serial buffer
+  }
+
+  for (int i = 0; i < 6; i++) {
+
+    Serial.print("Enter ");
+    Serial.print(txt[i]);
+    Serial.print(": ");
+
+    while (!Serial.available()) {
+      ; // wait for user input
+    }
+
+    str = Serial.readString();  // read user input
+    newDate[i] = str.toInt();   // convert user input to number and save to array
+
+    Serial.println(newDate[i]); // show user input
+  }
+
+  // update RTC
+  //rtc.adjust(DateTime(2021, newDate[1], newDate[2], newDate[3], newDate[4], newDate[5]));
+  rtc.setDate(newDate[2], 6, newDate[1], 0, 2020);
+  Serial.println("RTC Updated!");
+}
+
+void relayOn(int pin, bool controller = false)
+{
+  Serial.print("realy ");
+  Serial.print(pin);
+  Serial.print("\n");
+
+  if(controller == false)
+  {
+    Serial.println("jsemtu");
+    if(pin == relay4)
+    {
+      isOpen = true;
+    }
+    if(pin == relay1)
+    {
+      isOpen = false;
+    } 
+  }
+
+  digitalWrite(pin, HIGH);
+  delay(delayTime);
+  if(pin == relay3) {
+  //  delay(1500);
+  }
+  digitalWrite(pin, LOW);
+  
+  delay(delayTime);
+}
+
+void loop()
+{
+  //formatted strings are at the current time/date.
+  Serial.print(rtc.formatTime());
+  Serial.print("\r\n");
+  Serial.print(rtc.formatDate());
+  Serial.print("\r\n");
+  delay(1000);
+
+  // assign day and month into variable
+  char h1 = rtc.formatTime(RTCC_TIME_HM)[0];
+  char h2 = rtc.formatTime(RTCC_TIME_HM)[1];
+  int onlyHour = ( 10 * (h1 - '0') ) + h2 - '0';
+
+  char m1 = rtc.formatTime(RTCC_TIME_HM)[3];
+  char m2 = rtc.formatTime(RTCC_TIME_HM)[4];
+  int onlyMinutes = ( 10 * (m1 - '0') ) + m2 - '0';
+
+  char M1 = rtc.formatDate()[0];
+  char M2 = rtc.formatDate()[1];
+  int onlyMonth = ( 10 * (M1 - '0') ) + M2 - '0';
+  
+  Serial.println(onlyHour);
+  Serial.println(onlyMinutes);
+  Serial.println(onlyMonth);
+  Serial.println(isOpen);
+
+  // setting up date and time from serial monitor
+  if (Serial.available())
+  {
+    char input = Serial.read();
+    if (input == 'u') updateRTC();  // update RTC time
+  }
+
+  // time actions
+  if(onlyMonth >= 5 && onlyMonth <= 8)
+  {
+     if(onlyHour >= 7 && onlyHour <= 14)
+     {
+        if(isOpen == false)
+        {
+          Serial.println("cas otevira");
+          relayOn(relay4);
+        }
+     }
+     else
+     {
+        if(isOpen == true)
+        {
+          Serial.println("cas zavira");
+          relayOn(relay1);
+        }
+     }
+  }
+  
+  // rain actions
+  if(digitalRead(rain) != HIGH)
+  {
+    Serial.println("voda zavira");
+    //relayOn(relay1, true);
+  }
+  
+  // wind actions
+  if (digitalRead(wind) == HIGH)
+  {
+    Serial.println("vitr zavira");
+    //relayOn(relay1, true);
+  }
+  else
+  {
+    //digitalWrite(relay1, LOW); -> probably useless
+  }
+
+  // remote controller actions
+  if (mySwitch.available())
+  {
+    int received = mySwitch.getReceivedValue();
+    Serial.println("Received " + received);
+
+    if (received == recRelay1)
+    {
+      relayOn(relay1, true);
+    }
+    if (received == recRelay2)
+    {
+      relayOn(relay2, true);
+    }
+    if (received == recRelay3)
+    {
+      relayOn(relay3, true);
+    }
+    if (received == recRelay4)
+    {
+      relayOn(relay4, true);
+    }
+
+    mySwitch.resetAvailable();
+  }
+}